Installation
No tools necessary
Highly Durable
Your Satisfaction is Guaranteed
Honest Prices
Made in the USA
Gazebo Screen Installation
Step 1
Make sure the area you are mounting your screen is free from peeling paint, protruding nails, or loose wood. You may want to clean the area or sand lightly.
Step 2
Unroll screen and hold it up to where you would like to mount it, about 1 inch above your opening. You may want to pencil a line across the top of your oping and down each side so you can have a guide for attaching the hook fastener.
Step 3
Put screen aside for now and take self-adhesive hook fastener tape and unroll about 1 foot at a time. Pull back transparent tape and press hook fastener to your mounting surface about 1 foot at a time. You may want to use the rubber, plastic or wood handle of a hammer or pliers or a piece wood to apply pressure on the tape.
You may want to start at the top of your mounting surface with the hook self-adhesive fastener tape first then follow along each side.
Step 4
It is a good idea to let the self-adhesive hook fastener cure for 24 hours to achieve maximum adhesion. You may want to staple or nail through the self –adhesive fastener to increase the holding strength. (use nails or staples that will not rust)
ADDITIONAL NOTES:
A. Cleaning screen: Use mild soap and water. Make sure the screen is completely dry before storing. Do not store screen if it is damp.
B. The screen can be removed very easily. You will want to leave the self-adhesive material attached to your door frame.
Consumer Warning:
Screens have been manufactured to keep insects and leaves out. They are not engineered to be used for containment of children , pets, or animals.
Message Us
Get In touch below. Ask Any Question or Start a Free Quote
Call Us
(248) 904-1874
Working Hours
Monday through Friday
9 am to 4 pm EST.
Call Us
Text: 248-904-1874
Call: 800-498-1788
Call: 800-498-1788
info@gazeboscreens.com